PWM 12V 24V 30A Solar Lighting Panel Battery Regulator Charg
Description: 12V 24V 30A Solar Lighting Panel Battery Regulator Charge Controller CE. PWM solar charge controller PWM: Compared with normal solar charge controller, this PWM controller could increase efficiency by %.  This controller can charge and discharge at the same time. This PWM controller has perfect SOC function, control charge current, and supply power to the loads.  Feature: ISO Certified 30A Solar Panel Battery Regulator Charge Controller Electronic protection Fully automatic operation PWM charge mode(SOC) Micro-controller digital accuracy Suitable for all V DC lamps Big terminals,big distance between terminals Double digital LED display, numbers equal to timer setting Temperature compensation(with external temperature sensor)  Function: Always keep the battery on fill voltage condition. Prevent the battery from over-charging.  Prevent the battery from over-discharging. Prevent the battery from reverse charging to solar panels during nights. Reverse Polarity Protection for Battery Reverse Polarity Protection for Solar Panels When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.  Thunder protection: According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25ĂąâÆ condition, locked by the CPU procedure, cannot adjust.) The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature. SHOW TIME: Size:  TROUBLE SOLUTION:  Phenomenon: Green LED off, battery indicator LED is Red. Reason: Low voltage of battery Solution: A: Cut off the power, disconnect the load; reconnect the load after the charge become normal. B: Battery charge problem: Increase the solar panel power or change the battery.  Phenomenon: Battery indicator LED is orange and Load indicator LED is green, the loads cannot work. Reason: Over load or short-circuit causes the controller inner fuse cut off Solution: minutes after eliminated the malfunction, the fuse will automatically back to working. Package Includes: 1 x PWM Solar Charge Controller 1 x User Manual On Dec- at PST, seller added the following information: