Spectrum analyser ATTEN ATGHz Adamswiller
Appareil ayant très peu servi. Etat proche du neuf sans rayures. Testé et 100% fonctionnel. Vendu avec sa notice, cable alimentation EU. Tested 100%. Close from original state. No scratch. sold with power cord EU standard and its owner manual. ATTEN AT Spectrum Analyzer MHz, -100dBm to +13dBm ATTEN AT Spectrum Analyzer AT series spectrum analyzer will exceed 1Ghz(MHz) have the glancing or fine adjust center frequency with the 100KHz/grid~100MHz/grid span select, compose the simple frequency-domain. One 4 and 1/2 bit LED display can be selected for the center frequency and marking frequency. Features: - Frequency range: MHz - 4 and 1/2 digital displays. (Center frequency, 0.1MHz resolution) - -dBm amplitude range, 20MHz, 400MHz center frequency span and 4 KHz video filter. - Tracking generator (only the ATTEN+) - Output amplitude:+0~-50dBm(50?) - Specifications: - Frequency range: 0.15 to MHz- - Center frequency display accuracy: ±100kHz - Marker accuracy: 0.1% spans 100 kHz - Resolution of frequency display: 100 kHz (4.5 digit LED) - Frequency scans width accuracy: ±10% - Frequency stability: better than 150 kHz/ hour - IF Bandwidth (-3dB): 400 kHz and 20 kHz; - Video-Filter (ON): 4 kHz - Sweep rate: 43Hz- - - Amplitude range: -100dBm to +13dBm - Screen display range: 80dB (10dB/div.) - Reference level: -27dBm to +13dBm (in 10dB steps) - Reference level accuracy: ±2dB- - Average noise level: -90dBm (20 kHz Bandwidth) - Distortion: - Third order intermod.: -70dBc (two signals > 3MHz apart) - Sensitivity: Better than -90dBm- - Log scale fidelity: ±2dB (without attn.) 500MHz - Input attenuator: 0 to 40dB (4×10dB steps) - Input attenuator accuracy: ±1dB/10dB - Max. Input level: +10dBm, ±25V DC (0dB attn.) +20dBm (40dB attn.) - Frequency scans width: 100 kHz/div. to 100MHz/div, in 1-2-5 steps and 0Hz/div. (Zero Scan) Pour plus d'information ou acheter,